Home About Us Services Gallery Equipment Products Download Links Contact Us 
OEM Components |
|||
| Laser mirror | - LS15 15x15x1mm >5w - LS20 20x20x1.3 >8w - LS30 30x30x1.6 >8w - LS50 50x50x2mm >8w - DS2 100x100mm Max500w - DS3 110mm Dai. Max500w - DS4 120x120mm Max 500w - DS5 140x140mm Max 500w |
High quality laser mirrors with front surface reflection for minimum distortion and losses. Polarization preserving aluminum coating, suitable also for Holographie. All mirrors on float glass substrate, plastic foil added for shipment. Must be removed for normal operation. High reflectivity ratio. |  |
| Beam splitters | - ST20 - BS70/30 Max 40w - Dichro Red 10x20mm - Dichro Blue 10x20mm |
Splitting ratio 50:50 Splitting ratio 70:30 Dichroic color filter Red reflection Dichroic color filter Blue reflection |
 |
| Windows | - Window 60 60x60x1.3mm - Window 101 100x100x1.3mm |
AR-coated output window for decoupling optical section from environment. Low reflection. Window 101 reflectivity <2%, Window 60 reflectivity 4-6% | |
| Effect filters (Gratings) |
- EFF-Lin - EFF-burst - EFF-star - DSF-lin - DSF-burst - DSF-star - DSF-circle - DSF-square - Machado - Poly 10 - Poly 20 |
All EFF = 20x20mm All DSF = 50mm round Machado = 15x15mm, 5x10 clear aperture Poly = 50mm round |
|
| Effect mirrors | - SPEK-lin - SPEK-burst - SPEK-doubleburst |
All Spek mirrors = 100mm round, Float glass, 3mm thick | |
| Mirror mounts | - OSH1 25x25mm - OSH2b Fine-tune 25x25mm - BSM25 |
Mirror mounts for optical tables. Fits to M5 screws. Black anodized, top quality. BSM25: Special mount for beam splitters and dichroic filters |
  |
| Actuators | - STP 8x - STP 8xl (no Mirror) |
Noiseless actuator (beam switcher) for optical tables as a replacement for GM 20. Very fast and reliable component for professional use. Driver mounted on rear end of actuator. Needs 12VDC at 250mA and a switching voltage of 4 - 25V. Settling time 25ms. Rotating angle: 37.5° |  |
| Large mirror mounts | - Mount - Mount XY |
Steel mirror mounts for wall or roof mount. "Mount" fits to effect mirrors up to 10cm "Mount XY" fits to reflecting mirrors up to 14cm |
|
| Motors | - LDM 4 | Slow rotating motor with gear for driving effect filters DSF. Rotation speed from 1 - 10 rpm. Runs from 1.5 to 6VDC. High torque for high loads also. Comes with bracket for optical tables. | |
| Galvos | CT Set II | Full set of 2x CT6800HP. 2x MicroAmps, 2x cables, 2x adjustable galvo mount, drivers matched to galvos, fully adjusted |
 |
| CT Set III | 2x6210, MicroAmps, cables and mounts, up to 60.000pps, comes fully adjusted | ||
Galvo Power Supply (PSU) |
CT PSU Set II | Power PSU set for CT-Sets, 2x switching supply 90-250VAC, output 30VDC, 2A |  |
